Weishi Watch Timing Machine Tester Tools Multifunction Timegrapher NO. 1000
1000 is a precise mechanical watches test instrument, it is used for multi-testing. By watch manufacturers and watch technician. The frequency diagram of the watch can be displayed in the LCD screen. According to different watches, the instrument will automatically adjust optimal signal level during testing.
The instrument will automatically calculate the rate, amplitude, beat error, and display them by data in real time. For the conventional beat, the instrument can automatically response; for the special beat, can manually select.
The sampling period can selected by 2 seconds, 4 seconds, 6 seconds, 8 seconds, 10 seconds, 20 seconds, 30 seconds. 60 seconds, and the average of corresponding period will be regard as the precise value of the watch. Six kinds of testing position can be adjusted, and the simulation sound can be play in the speaker or mute.
The following beat numbers are selected by automatic selection mode. 12000,14400, 18000, 19800, 21600, 25200, 28800, 36000, 43200. If the tested beat is not in automatically selection, the instrument will display the closest beat number. But the test result is not correct.
At this time, use the manual mode to select the relative beat. Manual selection can selected out the beat number that Automatic select can not identify and rare beat number. The following beat are selected by Manual selection mode. 3600,6000, 7200, 7380, 7440, 7800, 9000, 9100, 10800,11880,12000,12342,12480,12600.
13320,13440,13500,14000,14040,14160,14200,14280,14400,14520,14580,14760,14850,15000. 15360,15600,16200,16320,16800,17196,17258,17280,17786,17897,18000,18049,18514,19332. 19440,19800,20160,20222,20944,21000,21031,21306,21600,25200,28800,32400,36000,43200.The lift angle is 52° for many common movements. Therefore the lift angle value of instrument for factory is set to 52°. Is required to calculate the amplitude and must be selected according to.
The lift angle can be set to between 30°and 70°. The measuring period selectable 2s? Use to recalculate the average values of the test result. After insert the socket, the screen is dark.
Check the power pilot LED is bright or not. The instrument can enter testing state with the sound of "Di", but after placed the watch on the sensor. The instrument do not work.
Check the second hand whether rotation (and amplitude must be more than 100 °). The crown of watch (leading) is against at the sheet metal of sensor.
Signal LED is bright, but the lines is scattered or occur many lines. Maybe the beat is mistake. Adjusted the right beat (frequency) by manual selection. International buyers please note: a.
Since we have many warehouses, maybe we will send the item to you via different packages from different warehouses.